Item |
Name |
Code |
Specifications |
Control Panels
|
|
|
|
Feature |
MG5000 |
MG5050 |
On-board Zones |
2 (4w/ATZ) |
5 (10w/ATZ) |
On-board PGMs |
2 |
4 |
|
MAGELLAN 32-Zone Wireless Transceiver Control Panel |
MG5000
MG5050 |
|
- Built-in transceiver (433MHz or 868MHz)
|
- 32 zones (any of which can be wireless)
|
- 32 users and 32 remote controls (one per user)
|
|
- 4-wire communication bus (connect up to 15 keypads)
|
- Supports REM3 hand-held remote keypad
|
- Supports up to 8 K32RF / K37 wireless keypads
|
- Supports up to 2 RPT1 wireless repeaters
|
|
- Supports IP100 Internet Module
|
- Supports VDMP3 Plug-in voice dialer
|
- Supports 16 PGMs (any of which can be wireless)
|
|
- In-field firmware upgrade via 307USB and WinLoad
|
- Menu-driven programming for the Installer, Master and Maintenance codes
|
- Multiple telephone numbers for event reporting: 3 monitoring, 5 for Personal Dialing and 1 for pager
|
- Patented 2 opto coupler dialer circuit – the most reliable dialer in the industry (US Patents 5751803, RE39406)
|
- Calendar with Daylight savings Time
|
|
|
- 9.6k baud communication with WinLoad
|
|
- Supports Memory Key (PMC5)
- Fits in a 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) metal box or in a 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal box
|
|
|
Keypads (Touch Screen, LCD, LED)
|
|
|
|

|
Paradox TM 50 Touch |
TM 50 |
- Thin, sleek design:
– 5.0 in. / 12.7 cm vivid color display (480 x 272 pixels)
– Intuitive, icon-based menus – no manual needed
- Control up to 8 PGM outputs
- In-field firmware upgradable via micro SD card
- Powerful advanced processor
- 1 zone/temperature input to connect a detection device or a TEMP07 (External Temperature Sensor)
- Customized translation via web application
- Surface-mount installation only; dimensions 14.4 x 9.6 x 1.4 cm (5.7 x 3.8 x 0.6 in.)
- Available in classic Piano Black and Pristine White, as well as other exciting designer colours
User-Friendly
Featuring intuitive menus and icons, ultra-fast response time when scrolling through pages, and clear and precise menu-driven prompts; the TM50 makes the user experience easier and friendlier than ever
SpotOn Alarm LocatorTM
This optional feature allows the user to upload up to 32 floor plans to the TM50, providing a graphic verification of zone locations customizable with illustrations or photographs.
OneScreen MonitoringTM
This optional feature displays the arming status of all partitions and zones. Also, with Solo TestT mode, you can easily test all system zones right from the TM50’s screen.
External SD Media Card Slot
Used to upload photos for use with the slide show function and easily upgrade firmware.
Customizable Labels
Allows the user to customize and edit zones, areas, users, and PGM labels.
|
 |
32-Zone Wireless Fixed LCD Keypad |
K37
(formerly K32IRF) |
- Compatible with MG6250, MG5000/MG5050 V3.22, Spectra SP V3.22 (except SP4000) and RTX3 V1.42
|
- Powered by 2 “AA” batteries, with built-in backup battery (PA6 is optional)
|
- A 6Vdc power adaptor (PA6 not included) is not required but can be used as an alternative power source
|
- Provides real-time zone and system status, and can be used to program the panel using only battery power (2 “AA” alkaline batteries)
|
- Goes into sleep mode after 20 seconds to save battery life, but remains synchronized with the panel in order to automatically wake up upon an entry delay or an alarm to provide full functionality (system status, zone display and buzzer)
|
- Fixed message display that guides you in the operation of the system
|
- Displays the status of 32 zones in 2 partitions
|
- Displays Arm, Sleep, Stay and Disarmed status for each partition
|
- Displays StayD, troubles, bypassed zones and alarm memory
|
- In-field firmware upgrade via 307USB and WinLoad
|
|
- Built-in transceiver (433MHz or 868MHz)
|
- Wireless range in a typical residential environment: 40m (130ft)
|
- 8 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
- The 6Vdc power adaptor is not required but can be used as an alternative power source (PA6 not included)
|
|
 |
32-Zone Wireless LED Keypad Module |
K32RF
(formerly MG32LRF) |
|
- Built-in transceiver (433MHz or 868MHz)
|
|
- Separate Arm, Sleep, Stay and Off LEDs per partition
|
- In-field firmware upgrade via 307USB and WinLoad
|
- Wireless range in a typical residential environment: 40m (130ft)
|
- 8 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
|
- Compatible: with MG5000, MG5050 and Spectra SP series (except SP4000)
|
- Powered by a 6Vdc power source (PA6 is mandatory)
|
- Includes a 3.7Vdc Li-ion backup battery
|
|
 |
32-Character Hardwired LCD Keypad Module |
K32LCD
(formerly MG32LCD) |
- 32-character blue LCD with programmable labels
|
- Real-time zone alarm display (until disarmed)
|
- In-field firmware upgrade via 307USB and WinLoad
|
|
- Menu-driven programming for easy system setup (installer and end user)
|
|
- Independently set chime zones
|
- 8 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
- Adjustable backlight, contrast and scroll speed
|
- Connects to 4-wire expansion bus
|
- Compatible with MG5000, MG5050 and Spectra SP series V2.31 and up
|
- Compatible with SP4000, SP65 V4.90 and up
|
|
 |
32-Zone Hardwired Fixed LCD Keypad Module |
K35
(formerly K32I) |
- Compatible with MG5000, MG5050 and Spectra SP series V2.31 and up
|
- Displays the status of 32 zones in 2 partitions
|
|
- Displays Arm, Sleep, Stay and Disarmed status for each partition
|
- Displays troubles, bypassed zones and alarm memory
|
|
- In-field firmware upgrade via 307USB and WinLoad
|
|
- Independently set chime zones
|
- 8 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
- Connects to 4-wire expansion bus
|
|
 |
32-Zone Hardwired LED Keypad Module |
K32
(formerly MG32LED) |
|
|
- Separate Arm, Sleep, Stay and Off LEDs per partition
|
- In-field firmware upgrade via 307USB and WinLoad
|
|
- Independently set chime zones
|
- 7 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
|
- Connects to 4-wire communication bus
|
- Compatible with MG5000, MG5050 and Spectra SP series
|
|
 |
10-Zone Hardwired LED Keypad |
K636 |
- Compatible with E55, MG5000, MG5050 and Spectra SP series
|
|
|
|
- Patented Key Light display (button lights up to indicate an open zone)
|
- Arm, Sleep, Stay and Off keys illuminate to indicate partition status
|
|
|
 |
10-Zone Hardwired LED Keypad Module (Vertical) |
K10V
(formerly MG10LEDV) |
|
|
- Separate Arm, Sleep, Stay and Off LEDs per partition
- Patented Key Light display (button lights up to indicate an open zone)
|
|
- Independently set chime zones
|
- 7 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
|
- Connects to 4-wire communication bus
|
- Compatible with MG5000, MG5050 and Spectra SP series
|
|
 |
10-Zone Hardwired LED Keypad Module (Horizontal) |
K10H
(formerly MG10LEDH) |
|
|
- Separate Arm, Sleep, Stay and Off LEDs per partition
|
- Patented Key Light display (button lights up to indicate an open zone)
|
|
- Independently set chime zones
|
- 7 one-touch action buttons
|
- 3 keypad-activated panic alarms
|
|
- Connects to 4-wire communication bus
|
- Compatible with MG5000, MG5050 and Spectra SP series
|
|
Remote Controls
|
|
|
|
 |
Emergency/
Panic Remote Control |
REM101 |
- Water resistant
- Panic function allows user to instantly send panic signal to monitoring station
- Manually-activated battery test function
- Visual indicator (LED) for arming actions and battery testing
- Includes lanyard attachment to facilitate portability; optional wrist strap and belt clip also available
- Includes easily-replaceable CR2032 battery, with a battery life of 3 years
- Available in 2 colors: black and white
- Wireless range in a typical residential environment:
- 30m (100ft) with MG6130 / MG6160 / MG6250 and RX1
- 45m (150ft) with MG5000 / MG5050, K32LX and K641LX
- 60m (200ft) with RTX3
- Available in 433 or 868 MHz
|
 |
Remote Control with Backlit Buttons |
REM15 |
|
|
- Perform up to 5 different actions
|
- Wireless range in a typical residential environment:
– 30m (100ft) with all-in-one consoles and RX1
– 45m (150ft) with MG5000 / MG5050
– 60m (200ft) with RTX3
|
- Available in 433MHz or 868MHz
|
|
 |
Hand-Held Two-Way Remote Keypad |
REM3 |
- Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
|
|
- System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status–even when out of range. Used to confirm the last action you did on the system while away from the system.
|
- Configure which partitions the REM3 arms/disarms
|
- Built-In Transceiver (433MHz or 868MHz)
|
- Independent Arm, Sleep, Stay and Off buttons and LED display per partition
|
- Control up to 6 PGMs and/or generate panics
|
- Keypad Mode: Requires code entry
Remote Mode: One-touch arming / Disarming
|
- Installer Diagnostic Mode:
Partition 1 LEDs = Signal Strength Display
Partition 2 LEDs = RF Interference Display
|
- Provides visual and auditory feedback of system status
|
|
- Press the Status button to receive system status
|
|
- Label to identify remote control owner
|
|
- Compact, water-resistant design
|
|
- Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)
|
|
|
 |
MAGELLAN 2-Way Remote Control with Backlit Buttons |
REM2
(formerly MG-REM2) |
- Supports StayD (Version 2.0 or higher)
|
- System Status Memory: The REM2 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status–even when out of range. Used to confirm the last action you did on the system while away from the system.
|
- Built-in transceiver (433MHz or 868MHz)
|
- Displays system status using visual (LED) and auditory feedback
|
- Press the Status button at any time to receive the system status
|
- Perform up to 6 different actions per remote control
|
- Compact, water-resistant design with backlight for buttons
|
- Wireless range in a typical residential environment:
– 30m (100ft) with MG6160 / MG6130
– 45m (150ft) with MG5000 / MG5050 / RTX3
|
|
 |
MAGELLAN Remote Control with Backlit Buttons |
REM1
(formerly MG-REM1) |
- Water resistant, stylish clear blue plastic with backlight for buttons
|
- Perform up to 5 different actions
|
- Wireless range in a typical residential environment:
– 30m (100ft) with MG6160 / MG6130
– 45m (150ft) with MG5000 / MG5050
– 60m (200ft) with RTX3
|
- Available in 433MHz or 868MHz
|
|
 |
2-Way Remote Control with Integrated Access Card |
RAC2
(formerly MG-RAC2) |
- Supports StayD (Version 2.0 or higher)
|
- Built-in transceiver (433MHz or 868MHz)
|
- Displays system status using visual (LED) and auditory feedback
|
- Press the Status button at any time to receive the system status
|
- Perform up to 6 different actions per remote control
|
- Compact, water-resistant design with backlight for buttons
|
- Built-in access card. Present remote control to a reader like an access card
|
- Wireless range in a typical residential environment:
– 30m (100ft) with MG6160 / MG6130
– 45m (150ft) with MG5000 / MG5050 / RTX3
|
|
 |
Remote Control with Integrated Access Card |
RAC1
(formerly MG-RAC1) |
- Water resistant, stylish clear blue plastic with backlight for buttons
|
- Perform up to 5 different actions
|
- Wireless range in a typical residential environment:
– 30m (100ft) with MG6160 / MG6130
– 45m (150ft) with MG5000 / MG5050
– 60m (200ft) with RTX3
|
- Available in 433MHz or 868MHz
|
- Built-in access card. Present remote control to a reader like an access card
|
|
Detectors
|
|
|
|
 |
Wireless Digital Outdoor Dual Side-View Detector with 4x Dual Sensors |
NVR780 |
Advanced Digital Technology:
- Two double passive infrared motion detector with eight narrow detection beams, managed by Full Authority Digital Electronics Control (FADEC)
|
- High-resolution and full dynamic range digital signal conversion
|
- High-speed, advanced algorithm digital signal processing
|
- Digital EMI / RFI interference rejection
|
- True Pet Immunity, up to 40kg (90lb)
|
Advanced Optical Technology:
- 4x dual element sensors arrangement
|
- High efficiency long focal point (1.77″) lens, providing long-range narrow beams
|
- 2 pairs of narrow beams per side provide 2x signals per protected area crossing for increased “catch” and false alarm rejection
|
- Combination optics of mirror reflector and 2nd generation Fresnel “LoDiff” Lens
|
- Increased white light rejection
|
Advanced Wireless Operation:
- Ultra low power management operation with Paradox Effi+ circuit
|
- Dual tamper detection (removal of cover or unit)
|
Easy Installation and Setup:
- Single or Dual Zone operation modes: two sides can report to a single zone or to two separate zones
|
- Optical and digital range adjustments
|
- Bright LED and buzzer indicator for clear adjustment feedback
|
|
- Wall mount, with built-in level tool
|
- In-field firmware upgradable via serial port
|
|
 |
Wireless PIR Motion Detector with Built-in Pet Immunity
(18kg/40lb Pet Immunity) |
PMD2P |
|
- Immune to animals weighing up to 18kg (40lb)
|
- 11m x 11m (35ft x 35ft) and up to 15m (50ft) for center beams with 88.5° viewing angle
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160, MG6130, and MG6250;
– 70m (230ft) with MG5000, MG5050, and RTX3
|
- When a higher level of immunity is required, such as when animals are constantly in the detection area, consider using PMD75
|
- Patented Auto Pulse Signal Processing
|
- Automatic Temperature Compensation
|
- Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
|
- 3-minute energy save mode after two detections within a five-minute period
|
- Dual tamper mechanism (wall/cover)
|
- Slide switch to select high or low sensitivity
|
|
|
|
|
 |
Analog Single-Optic PIR
(18kg/40lb Pet Immunity) |
PMD1P
(formerly MG-PMD1P) |
|
- Immune to animals weighing up to 18kg (40lb)
|
- 11m x 11m (35ft x 35ft) and up to 15m (50ft) for center beams with 88.5° viewing angle
|
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160, MG6130;
– 70m (230ft) with MG5000, MG5050 and RTX3
|
- When a higher level of immunity is required, such as when animals are constantly in the detection area, consider using PMD75
|
- Patented Auto Pulse Signal Processing
|
- Automatic Temperature Compensation
|
- Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
|
- 3-minute energy save mode after two detections within a five-minute period
|
|
 |
Digital Dual-Optic High-Performance PIR
(40kg/90lb True Pet Immunity) |
PMD75
(formerly MG-PMD75) |
- Patented Digital Motion Detection
|
- Dual optics (2 dual opposed element sensors)
|
- Immune to animals weighing up to 40kg (90lb)
|
- Digital Dual Opposed Detection
|
- Digital Shield algorithm with adjustable sensitivity
|
- Single or Dual Edge Processing
|
- 11m x 11m (35ft x 35ft) with 90° viewing angle
|
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160 and MG6130;
– 70m (230ft) with MG5000, MG5050 and RTX3
|
- Patented Auto Pulse Signal Processing
|
- Automatic Temperature Compensation
|
- Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
|
- 3-minute energy save mode after two detections within a five-minute period
|
|
 |
Outdoor Digital Dual-Optic High-Performance PIR
(40kg/90lb True Pet Immunity) |
PMD85 Series
(formerly MG-PMD85W) |
- Impact and temperature resistant casing
|
- Operates at -35°C to +50°C (-31°F to +122°F)
|
- Casing lined with an injected rubber gasket
|
|
- Dual Optical Filtering System
|
- Multi-level sensitivity adjustment
|
- Patented Digital Motion Detection
|
- Dual optics (2 dual opposed element sensors)
|
- Digital Dual Opposed Detection
|
- Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
|
- 3-minute energy save mode after two detections within a five-minute period
|
- Can be used with the Heavy Duty Outdoor Swivel Bracket (SB85).
|
|
 |
Heavy duty Outdoor Swivel Bracket |
SB85
(formerly MG-SB85W) |
- For use with the PMD85 and the DG85 outdoor digital PIRs
|
- Innovative T-joint allows for movement along 2 axes for better maneuverability and better detector positioning
|
- 3 in 1: ceiling, wall or corner mount bracket
|
- Cap lock prevents unauthorized repositioning of detector
|
|
Wireless Sirens
|
|
|
|
 |
Indoor Wireless Siren with Built-in Strobe Light |
SR120 |
- Compatible with MG Series V4.0 and SP series V4.0 (except SP4000) when using an RTX3 V1.5
|
- Built-in transceiver (433MHz or 868MHz)
|
- Wireless siren (100dB or more) with integrated strobe light
|
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160, MG6130, and MG6250
– 70m (230ft) with MG5000, MG5050 and RTX3
|
- Fast alarm response time (within 4 seconds)
|
- 2.5 hour alarm display (strobe flashes every 4 seconds after bell cutoff)
|
- Siren presence supervised by control panel
|
- Dual tamper protection (cover removal, and removal from wall)
|
- Assign a total of 4 sirens per control panel (including SR150)
|
- In-field firmware upgradeable via 307USB
|
|
- Signal strength/RF transmission and status LED
|
- Fully powered using three 1.5Vdc type “C” alkaline batteries (not included)
|
|
- Operating temperature: -20°C to 50°C (-4°F to 122°F)
|
|
- Dimensions: 15.2cm X 4.6cm X 10.9cm (6in X 1.8in X 4.3in)
|
|
|
 |
Wireless Siren with Built-in Strobe |
SR150 |
- Compatible with MG Series V4.0 (except SP4000) and SP series V4.0 when using an RTX3 V1.5
|
- Built-in transceiver (433MHz or 868MHz)
|
- 100db wireless siren with integrated strobe light
|
- Weather-resistant design using a PC/ABS enclosure with UV protection (-20°C to 50°C / -4°F to 122°F)
|
- Battery powered only, no need for AC power
|
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160, MG6130;
– 70m (230ft) with MG5000, MG5050 and RTX3
|
- Fast alarm response time (4 seconds)
|
- 2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off)
|
- Siren presence supervised by control panel
|
- Dual tamper protection (cover removal, and removal from wall)
|
- Assign up to 4 sirens per control panel
|
- In-field firmware upgradeable via 307USB
|
|
- 4-LED signal strength and status display
|
- Strobe lens available in 4 colours (red, blue, amber, and clear)
|
- Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply.
|
|
- Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in)
|
|
|
Door Contact
|
|
|
|
 |
2-Zone Long-Range Door Contact |
DCT10
(formerly MG-DCT10) |
- 2-zone capabilities where each zone is independent and has its own serial number
|
- Zone 1 – One of two high-sensitivity reed switches (magnet included)
|
- Zone 2 – Universal transmitter input (N.O./N.C.)
|
- Wireless range in a typical residential environment:
– 35m (115ft) with MG6160 and MG6130;
– 70m (230ft) with MG5000, MG5050 and RTX3
|
- Low battery and signal transmission LED
|
- Available in 433MHz or 868MHz
|
|
- Dimensions: 12.4cm x 4.5cm x 3.3cm (4.9in x 1.8in x 1.3in)
|
|
 |
2-Zone Wireless Door Contact |
DCTXP2
(formerly MG-DCTXP2) |
- 2-zone capabilities where each zone is independent and has its own serial number
|
- Zone 1 – One high-sensitivity reed switch (magnet included)
|
- Zone 2 – Universal transmitter input (N.O./N.C.)
|
- Wireless range in a typical residential environment:
– 30m (100ft) with MG6160 and MG6130;
– 60m (200ft) with MG5000, MG5050 and RTX3
|
- Available in 433MHz or 868MHz
|
|
- Dimensions: 11cm x 3.2cm x 2.5cm (4.4in x 1.3in x 1in)
|
|
Expansion Modules
|
|
|
|
 |
Ultra-Small Door Contact |
DCT2
(formerly MG-DCT2) |
- One high-sensitivity reed switch (magnet included)
|
- Wireless range in a typical residential environment:
– 20m (65ft) with MG6160 and MG6130;
– 40m (130ft) with MG5000, MG5050 and RTX3
|
- Available in 433MHz or 868MHz
|
|
- Dimensions: 4.4cm x 3.0cm x 1.7cm (1.7in x 1.2in x 0.7in)
|
|
 |
8-Zone Expansion Module |
ZX8SP
(formerly SP-ZX8) |
- Compatible with MG Series, SP Series, and E Series
|
|
|
- Use zone input as an anti-tamper switch input
|
|
 |
8-Zone Expansion Module |
ZX8
(formerly APR-ZX8) |
- Compatible with MG Series, SP Series, E Series, and Digiplex EVO
|
|
|
- Use zone input as an anti-tamper switch input
|
|
 |
Wireless Expansion Module |
RTX3
(formerly MG-RTX3) |
<tdcolspan=”2″>
- Compatible with 728ULT, 738ULT, Spectra SP Series, Digiplex and Digiplex EVO
</tdcolspan=”2″><tdcolspan=”2″>
- 32 wireless zones (Spectra SP and EVO only)
</tdcolspan=”2″><tdcolspan=”2″>
- Maximum number of remote controls: 8 w/Esprit, 32 w/SP, 999 w/EVO
</tdcolspan=”2″><tdcolspan=”2″>
- Remote control compatibility:
- EVO: REM1, REM2
- SP: REM1, REM2, REM3
- Esprit: REM1
- Stand Alone: REM1
</tdcolspan=”2″><tdcolspan=”2″>
- Wireless PGMs (8 w/EVO, 16 w/SP)
</tdcolspan=”2″><tdcolspan=”2″>
- Functions with all MAGELLAN transmitters including 2WPGM
</tdcolspan=”2″><tdcolspan=”2″>
- Supports two RPT1 and eight K32LRF / K32IRF (Spectra SP only)
</tdcolspan=”2″><tdcolspan=”2″>
- In-field firmware upgradeable via CV4USB and Winload
</tdcolspan=”2″><tdcolspan=”2″>
</tdcolspan=”2″><tdcolspan=”2″>
- Low battery, tamper and check-in supervision
</tdcolspan=”2″><tdcolspan=”2″>
- Transmitter signal strength display
</tdcolspan=”2″>
- 3 PGM outputs and 1 optional output
|
|
- Noise level test and indicator
|
|
|
Accessories
|
|
|
|
 |
4-PGM Expansion Module |
PGM4 (formerly APR3-PGM4) |
- Compatible with E55/E65 (V2.00), MG/SP (V3.00) and EVO
|
- 4 fully programmable 5A relay outputs
|
- Deactivate PGM after event and/or timer
|
- Pulse PGM output for fire alarms
|
- In-field firmware upgradeable
|
|
 |
Direct Connect Interface |
307USB |
- Incorporates a USB port and a serial port (DB-9)
|
- Enables control panel to communicate with a PC at 60m (200ft)
|
- Connect from the control panel’s serial port connector to a PC’s serial (DB-9) or USB port
|
- Includes 3 LED status indicators (PC, Panel and RX/TX)
|
- Communication speed:
– 57.6k baud (MAGELLAN)
– 38.4k baud (EVO)
– 9.6k baud (MG series and Spectra SP series)
|
|
 |
Bracelet |
B101 |
- Accessory for the REM101; convenient wrist strap for quick and easy access
|
 |
Belt Clip |
BC101 |
- Accessory for the REM101; convenient, sturdy belt clip to attach REM101 securely to person
|
 |
Wall Bracket |
WB101 |
- Accessory for the REM101; wall mount bracket for installation on flat surfaces
|
 |
USB Memory Key |
PMC5 |
- Used to download or upload system programming to or from a PC with WinLoad V4.0 or higher
|
- Lock switch to prevent accidental loss of data
|
|
- Download or upload control panel/console programming within seconds
|
- Connect directly to memory connector on the control panel/console
|
- No need for a telephone line, PC or any other peripheral device
|
|
Expanders
|
|
|
|
 |
Expandable To 32-Zone Control Panel with 476 PIR,
Suits
SP4000
SP5500
SP6000
SP65
SP7000 |
SP65 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Supports IP100 Internet Module
|
|
- Supports VDMP3 Plug-in voice dialer
|
|
- Supports REM3 hand-held remote keypad – require RTX3 V1.31 or higher (SP4000 – One way only)
|
|
|
|
- In-field firmware upgradeable via a 307USB
– WinLoad for SP5500/SP6000/SP7000
– InField Firmware Upgrade Software for SP4000/SP65
|
|
- Menu-driven programming for the Installer, Master and Maintenance codes
|
- Multiple phone numbers: 3 for monitoring station, 5 for personal dialing and 1 for pager reporting (SP65: via PCS200 only – GSM reporting)
|
- Patented 2 opto coupler dialer circuit – the most reliable dialer in the industry – US Patents 5751803, RE39406 (N/A with the SP65)
|
- Automatic Daylight Savings Time feature
|
- Push button software reset (reset to default values and restart)
|
- Direct connect at 9.6k baud
– WinLoad for SP5500/SP6000/SP7000
– Babyware for SP4000/SP65
|
|
- Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
|
|
Proximity Readers
|
|
|
|
 |
Indoor Proximity Reader with 10cm (4in) Read Range |
R870
(formerly CR-R870-A) |
|
- Up to 10cm (4″) read range with C702 ISO PosiCard
|
- Two status LEDs (red and green) and beeper
|
- Supports the 26-bit Weigand ouput format
|
|
|
- Dimensions: 11cm H X 7.3cm W X 2cm D (2.8″ H X 4.5″ W X 0.8″ D)
|
- Operating temperature: +10ºC to +65ºC (+50ºF to +149ºF)
|
- Material: UV resistant, ABS plastic
|
- Available in black or white
|
|
 |
4-Wire Sealed Indoor/Outdoor Proximity Reader and Keypad |
R915
(formerly DGP-R915) |
- Only 4 wires instead of 7 to connect with 4-wire access control modules
|
- In-field firmware upgradeable via CONV4USB and WinLoad
|
- Adjustable red/green LED intensity and buzzer frequency
|
- Extreme weather-resistant design (injected rubber gasket and PCB cover)
|
|
- Available in 3 colors (white, silver and black)
|
|
 |
4-Wire Indoor/Outdoor Proximity Reader |
R910
(formerly DGP-R910) |
- In-field firmware upgrade
|
- Extreme weather-resistant design
|
- Up to 10cm (4in) read range with C702 Standard Proximity Card(Clamshell)
|
- Supports the RS-485 output format
|
|
|
- Advanced SwiftRead Technology
|
|
|
|
- R910 V1.00 are not upgradable to V2.10, only V2.00 readers are upgradable to V2.10
|
|
- Imperial compatibility with R910 V2.10 or higher only
|
|
|
 |
Indoor/Outdoor Extended Range Proximity Reader with 61cm (24in) Read Range |
R890
(formerly CR-R890-BL) |
- Extreme weather-resistant design
|
- Up to 61cm (24″) read range
|
- Wiegand, ABA and custom output formats
|
|
- Advanced SwiftRead Technology
|
|
- Supports the 26-bit Weigand output format
|
|
 |
Indoor/Outdoor Proximity Reader and Keypad, Access Version |
R885
(formerly CR-R885-BL) |
- Extreme weather-resistant design
|
- Use as a keypad, reader or both
|
- Embedded 12-button keypad
|
- Up to 10cm (4″) read range with ISO card
|
- Programmable face light, LEDs and buzzer
|
|
- Reader supports 26- and 37-bit Wiegand
|
- Keypad: 8-, 26- and 37-bit Wiegand, 4-bit with or without parity, and 4 bits buffered with or without parity
|
|
 |
Indoor/Outdoor Proximity Reader and Keypad, Stand-alone Version |
R885S
(formerly CR-R885-SB) |
- Extreme weather-resistant design
|
- Use as a keypad, reader or both
|
- Embedded 12-button keypad
|
- Up to 10cm (4in) read range with C702 Standard Proximity Card(Clamshell)
|
- Programmable face light, LEDs and buzzer
|
|
|
|
|
- Program access to require up to 2 cards and 2 PINS
|
|
|
Proximity Card/Tags
|
|
|
|
 |
Standard Proximity Card (Clamshell) |
C702
(formerly CR-R702-A) |
- Convenient credit card size
|
|
- Vertical slot for clip attachment
|
- Durable PVC housing (white)
|
- Passive (no battery required)
|
|
 |
Blue Proximity Key Tag |
C704
(formerly CR-R704-B) |
- Attaches conveniently to a key ring
|
- Durable clear blue plastic housing
|
- Passive (no battery required)
|
|
 |
2-sided High-Gloss ISO Card |
C706
(formerly CR-R706-A) |
- Convenient credit card size
|
|
- Vertical or horizontal slot for clip attachment
|
- Durable PVC housing (white)
|
- Passive (no battery required)
|
- Suitable for high-quality photo ID printing
|
|